CenturyLink DSL Light Red – Your modem gives you access to the web. This article is going to shed some light on the technology, in this powerful little box this article is all about rebooting and resetting the modem, making sure you understand the impact on your internet connection and wireless devices before rebooting or resetting are important.
Most CenturyLink modems resemble the modems, in this article but may vary slightly and will point out some of the differences, you may see if you just need to reboot or power cycle your modem, simply unplug the power cord from the back of the modem, leave it unplugged for 10 seconds and then plug it, back in power cycling your modem will reboot it without any loss of your personalized settings, such as a customized SSID and passphrase.
CenturyLink Red DSL Light
CenturyLink DSL Light Red
Pressing the reset button should be used only to restore the modem to its default settings including your wireless settings network name or SSID and the network key or passphrase for example. If you customize your wireless network but can’t remember your custom key or passphrase you may want to restore the modem to default settings, you can even use the service troubleshooter at https://serviceassistance.centurylink.com/ticketing/residential/displayResidentialTicketingLanding.do, to retrieve your credentials to return the modem to its default settings.
Use the tip of a pen or paper clip to press and hold the reset button for more than 10 seconds, after resetting the modem to default settings the power light will turn yellow, and you need to go through the modem activation process again as if it were a brand new modem customizing your ID and password is something, you will easily remember is highly suggested.
Don’t forget to write them down for future wireless use, but you can always use the service troubleshooter at
https://serviceassistance.centurylink.com/ticketing/residential/displayResidentialTicketingLanding.do, to have your wireless credentials sent to you and remember if you reset the modem, you will need to update network names and keys on any wireless device.
CenturyLink DSL Red
Red Internet Light on the CenturyLink Modem
Red Internet Light on the CenturyLink Modem – You use on your network the modems factory default network name and passwords are printed on the bottom of the modem. We hope you have a better understanding of your modem and how it works for additional information please visit http://www.centurylink.com/home/help.html or internet technical support assistance is available at http://www.centurylink.com/help/chat/?rid=chat. Thank you for choosing CenturyLink.
When it fully re-establishes the connection, it turns solid green. If the modem does not find the CenturyLink network, the DSL Light will turn RED. This can be caused by bad wiring or the modem being plugged into the wrong jack.
CenturyLink Modem DSL Light Red
CenturyLink Modem DSL Light Red – If the light is blinking, this usually means that there is a problem with the connection. However, another cause could be that the phone cable from the wall jack to the modem could have come unplugged or gone bad.
Incoming search terms:
- century link modum dsl light not turning on
- centurylink modem internet flashing red
- modem two red lights century link
- Red flashing light modem CenturyLink
- why is the world emblem on my centurylink router red