To obtain a lighter color use less dye. Add one cup of salt to cotton or linen fabrics when using Rit dye to achieve a better looking color.
This is done either by boiling the part or using an anodizing sealant like nickle acetate.
How to use rit liquid dye in a bucket. Wet the fabric squeeze out any excess water and add it to the dyebath. Add 1 teaspoon of liquid dye for every cup of water. Wet the fabric squeeze out any excess water and add it to the dyebath.
Add 2 teaspoons of powdered dye for every cup of water. We recommend at least 1 bottle of Rit All-Purpose Dye or 2 bottles of Rit DyeMore for darker colors. Once the part is dyed youre supposed to seal it.
If a scrap piece of fabric isnt available then use a fabric swatch that. 7142020 Fill a pot with enough cups of water to cover the plastic piece you want to dye. If using powder dye dissolve thoroughly in of very hot water.
Pour dissolved powder dye or well-shaken liquid dye into dyebath and mix well. Pre-dissolve the liquid Rit dye in two cups of hot water. If color is too dark add more water.
Pour hot water into a bucket or sink. If color is too light add more dye. Place clothespins in pushing them down.
492020 To use liquid Rit dye fill a bucket with hot tap water and the dye thoroughly wet the fabric to be dyed with cool water place it in the container to soak for 10 to 30 minutes rinse the fabric thoroughly in a sink and run it through a washing machine with an old towel to. Test dye color with a paper towel or the test fabric to assess color. Fill a bucket or sink with three gallons of hot water per pound of fabric to be dyed.
If using a powdered dye dissolve it in two cups of very hot water before adding to the water. Test color by dipping a paper towel into the dyebath. Pour dissolved powder dye or well-shaken liquid dye into dyebath and mix well.
If using powder dye dissolve thoroughly in of very hot water. Stir until the dye is incorporated into the water. Use half of a bottle of liquid Rit dye and three gallons of hot water for each pound of fabric.
Pour enough water into the sink or bucket that the item can move around freely in the water. This dye can stain so be careful where youre mixing it up. Fill a plastic bucket 12 to 23 full of hot water from the tap and dissolve the package of RIT into it stirring to dissolve granules.
If you are using Rit DyeMore Synthetic Fiber Dye we recommend first heating up the dyebath on your stove to almost boiling. The most realistic test would be to use a scrap piece of fabric from the garment you are dyeing and leave it in the dyebath for 5 minutes. If color is too light add more dye.
Still RIT dyes arent the best for doing anodizing work but are passable. Slip on rubber gloves and add dye to water and stir well to mix. If dyeing 100 polyester we recommend at least 1 bottle of Rit DyeMore.
The yellow was actually quite nice looking though. For a darker or brighter color double the amount of dye. If color is too dark add more water.
Step 7 Pour 12 cup of white vinegar into dye when you are coloring silk or wool fabrics. Test color by dipping a paper towel into the dyebath. I went for the cheap method which was boiling for about 15 minutes.
