Pre-dissolve the liquid Rit dye in two cups of hot water. Learn How to Tie Dye.
Stir your Rit Dye in a small container filled with hot water until it is completely dissolved.
How to tie dye with rit liquid dye. We recommend at least 1 bottle of Rit All-Purpose Dye or 2 bottles of Rit DyeMore for darker colors. Check the packaging to find out exactly how much dye to use for the amount of fabric you wish to dye. Pour hot water into a bucket or sink.
What Rit made so popular in the 60s is still relevant today. To set the dye do the following while the fabric is still tied up. Use half of a bottle of liquid Rit dye and three gallons of hot water for each pound of fabric.
Take the fabric out of the bowl or bucket and wring it out. In the areas where they run together they will blend together and create a third color. Make each color of dye into a stock solution.
7292008 Alternatively you may apply your all-purpose or direct dye mixed with a small amount of water allow to dry then wrap in unprinted newsprint and steam your shirt over boiling water for half an hour or longer after the water comes to a boil in a. After the dye is applied let the fabric sit for 30 minutes to allow the dye to absorb. Products Inspiration Color Formulas FAQ How To Dye Contact Techniques Store Locator.
This thorough and easy-to-follow dyeing tutorial shows you exactly how to prepare your dye. US Measurements Metric Measurements. If dyeing 100 polyester we recommend at least 1 bottle of Rit DyeMore.
Dip the tied bundle in your choice of dye bath and squeeze to remove any excess liquid. Place your fabric into the washing machine. Tie Dye Rit Dye.
Due to the lightness of the desired color this formula works best with a medium or large dyebath. A two liter bottle works really well for this. Transform old and stained shirts into a brand new and completely wearble piece when you learn How to Dye a Shirt with RIT Dye.
To obtain a lighter color use less dye. 34 Teaspoon Sunshine Orange. Keep paper towels handy to remove any dye that seeps into an area where you plan to place another color.
7232010 DO NOT use this method with children. Prepare Your Squeeze Bottle s If you are using squeeze bottles from our Tie-Dye Accessory Kit add 2 teaspoons of dye to the bottle and fill the rest with hot water. For a darker or brighter color double the amount of dye.
Use rubber bands to section off your project for dyeing — be sure to wrap them tightly around the fabric to keep dye from seeping through. By dissolving it into several cups of hot water and then pouring that into about a half gallon of cold water. If you are using your own squeeze bottle mix 2 cups of water with 2 tablespoons of dye and pour into your squeeze bottle.
Repeat with additional dyes until you reach your desired combination of colors. Allow the dye mixture to cool once it is all dissolved. With just a few rubber bands you can fold twist pleat and crumple fabric to achieve fun bold and psychedelic patterns.
Add 12 cup of table salt and one cup of white vinegar if desired. Pour enough water into the sink or bucket that the item can move around freely in the water. Otherwise you can prepare the item the same way but use the Rit in liquid form.
2232017 Wash the fabric in a washing machine.
